Opposite and Opposed Carabiners at the Masterpoint

Top-Rope Anchors Learning Centre

Lesson 5 of 9

Top-Rope Anchors

Why two gates set opposite and opposed keep the rope from unclipping itself.

Safety note: These lessons are a reminder of skills taught in person. They do not replace hands-on instruction or supervised practice. Climbing and belaying can cause serious injury or death. Do not belay or climb without supervision until a qualified instructor has confirmed your skills, and always follow the manufacturer's instructions for your equipment.

The masterpoint holds the rope for every climb. Two carabiners with their gates opposite and opposed mean the rope can't unclip itself, even if one gate is pushed open by rock or twisted by the rope.

How to Set Opposite and Opposed Masterpoint Carabiners

Opposite and opposed: the gates cross in an X when both are opened.

  1. 1 Clip two carabiners through the masterpoint: two lockers, or two non-lockers if that is what you have.
  2. 2 Turn them so the gates are on opposite sides and open in opposite directions, so that when both are opened, the gates cross in an X.
  3. 3 Do the X test: hold them together and open both gates. The gates should cross in an X. If they don't, turn one carabiner end over end and test again.
  4. 4 Lock the lockers and clip the rope through both carabiners.

At SCA we use two lockers at the masterpoint, because a locked gate can't be pushed open by rock or by the rope. If you only have non-lockers, setting them opposite and opposed still gives you much of that protection.

Common mistakes to avoid

Want more Squamish climbing tips in Google? Add Squamish Climbing Academy as a preferred source.

Learn this in person

This lesson is taught hands-on with a qualified guide in:

Top-Rope Anchors ยท Intro & Anchors Weekend Combo

Questions and Comments

Have a question about this lesson? Share what you are working on, ask for clarification or join the conversation.

No comments yet. What would you like to know?