Rock Climbing Equipment: A Beginner’s Guide
Intro to Climbing Learning Centre
Lesson 2 of 11
Intro to Climbing
What each piece of climbing gear does and how to check it.
Safety note: These lessons are a reminder of skills taught in person. They do not replace hands-on instruction or supervised practice. Climbing and belaying can cause serious injury or death. Do not belay or climb without supervision until a qualified instructor has confirmed your skills, and always follow the manufacturer's instructions for your equipment.
Every piece of gear is part of one system. If one part is set up wrong, the whole system can fail. Knowing what each item does, and how to check it, is the first step to being a safe partner. Practise equipment checks with a guide on our Intro to Rock Climbing course.
Essential Rock Climbing Gear and Pre-Climb Checks
| Item | What it does | Check before you climb |
|---|---|---|
| Harness | Connects you to the rope. You tie in through both tie-in points; the belay device clips to the belay loop. | Waist belt snug above the hip bones, buckles fastened as the manufacturer shows, leg loops snug, no twists. |
| Helmet | Protects your head from falling rock, dropped gear and bumps. Climbers and belayers both wear one. | Buckled and snug, sits level on your forehead, no cracks or damage. |
| Climbing shoes | Sticky rubber helps you stand on small footholds. A snug fit works best. | Straps or laces done up; clean soles. |
| Rope | A dynamic (stretchy) rope that softens a fall. It runs from the climber up through the anchor and back down to the belayer. | No cuts or damaged sheath. Stopper knot tied in the free end. Keep it off sand and don't step on it. |
| Belay device | Adds friction so the belayer can catch, hold and lower the climber. Tube-style and assisted-braking devices both need a brake hand at all times. | Loaded the right way (most devices show a diagram) and clipped to the belay loop. |
| Locking carabiner | Connects the belay device to the harness. Pear-shaped (HMS) lockers are common for belaying. | Gate closed and locked. Give it a squeeze check. Loaded along its long axis. |
| Anchor | The point at the top of the route that the rope runs through. | On the Intro course your guide builds and checks every anchor. Learn to build them in Top-Rope Anchors. |
Climbing Harness Parts: Tie-In Points and Belay Loop
Harness parts (simplified). Follow the manufacturer's instructions.
Common mistakes to avoid
- Clipping the belay carabiner to a gear loop or through only one tie-in point. Gear loops are for gear only.
- A harness worn low on the hips or with a twisted leg loop.
- Forgetting to lock the carabiner, or using a non-locking carabiner for belaying.
- No stopper knot in the end of the rope.
Want more Squamish climbing tips in Google? Add Squamish Climbing Academy as a preferred source.
Learn this in person
This lesson is taught hands-on with a qualified guide in:
Intro to Rock Climbing · Intro & Anchors Weekend Combo · Youth Climbing Camps
Questions and Comments
Have a question about this lesson? Share what you are working on, ask for clarification or join the conversation.
No comments yet. What would you like to know?
